This article aims to provide a clear and comprehensive understanding of the differences between cutting torches and welding torches, catering to both beginners and experienced professionals in the metalworking industry.

Flux is a granular welding material. It melts to form slag and gas during welding, and plays a protective and metallurgical role for the molten pool. When welding, it melts to form slag and gas, and acts as a protective and metallurgical treatment for the molten metal.CompositionFlux is composed of

This type of steel as a high-strength welded structural steel, the carbon content is limited to low, usually less than 0.18% carbon mass fraction, and in the design of the alloy composition are also considered weldability requirements, so low carbon tempered steel welding is basically similar to nor

With the development of industry, there are many different types of metal materials that have emerged. The common ones are plated steel sheets, stainless steel sheets, aluminum alloys, copper alloys and other materials. When spot welding machine is used to weld these corresponding metal materials, d

1. Welders must wear welding masks to protect their eyes when working

1) It has a wide welding current adjustment range, which can weld both thin and thick parts.

1. Welding construction does not pay attention to choose the best voltage[Phenomena] During welding, the same arc voltage is selected regardless of the size of the groove, whether it is priming, filling, covering, or the size of the groove. In this way, the required penetration depth and width may n

316L stainless steel belongs to austenitic stainless steel, which has good plasticity, toughness, corrosion resistance and excellent comprehensive performance.We carried out a welding test on 316L stainless steel, using electrode arc welding (SMAW). The thickness of the 316L stainless steel plate us

MIG Arc Welding!MIG Arc Welding is roughly divided into two categories: MIG Inert Gas (MIG) and MIG Active Gas (MAG). There is a large selection of welders on the market that can perform both types of welding, as well as a variety of solutions for process and control options. However, the design of