The INWELT PSF405 is an ESAB-style gas-cooled MIG/MAG welding torch designed for industrial manual welding applications. It supports Ø0.8–1.6 mm welding wire and is available with 3 m, 4 m and 5 m cable assemblies. The PSF405 features replaceable front-end consumables, Euro-type complete-torch configurations and OEM/ODM supply options for welding equipment distributors and industrial buyers.
PSF405
INWELT
Gas Cooled
60%, 350Amp CO2, 320Amp MIX
Φ0.8-1.6 mm
OEM Acceptable
| Availability: | |
|---|---|
| Quantity: | |
The INWELT PSF405 ESAB-Style MIG Welding Torch is a gas-cooled MIG/MAG welding gun designed for industrial manual welding applications. It supports welding wire diameters from Ø0.8 mm to Ø1.6 mm and is available with 3 m, 4 m and 5 m cable assemblies.
The PSF405 features a curved torch neck, an insulated handle, a replaceable front-end consumable system and a Euro-type connection configuration. The product is intended for welding equipment distributors, industrial fabricators, importers and OEM customers seeking a PSF405-style welding gun or replacement assembly.
As part of the INWELT PSF Series, the PSF405 provides a higher-capacity torch option than the PSF305 for applications requiring a corresponding gas-cooled MIG/MAG welding gun.
INWELT supplies complete PSF405 welding torches, replacement consumables and OEM/ODM solutions for international B2B buyers.
The following table summarizes the standard INWELT PSF405 product configuration.
| Specification | INWELT PSF405 |
|---|---|
| Brand | INWELT |
| Model | PSF405 |
| Product Type | ESAB-Style MIG Welding Torch |
| Welding Process | MIG / MAG (GMAW) |
| Cooling Method | Gas Cooled / Air Cooled |
| Currently Listed CO₂ Rating | 350A at 60% duty cycle — pending technical confirmation |
| Currently Listed Mixed-Gas Rating | 320A at 60% duty cycle — pending technical confirmation |
| Welding Wire Diameter | Ø0.8–1.6 mm |
| Cable Length | 3 m / 4 m / 5 m |
| Listed Connection | Euro Central Connector |
| Standard Contact Tip | Ø1.2 mm / M8 × 37 |
| Front-End Parts | Gas Nozzle, Contact Tip, Gas Diffuser, Torch Neck |
| Application | Industrial MIG/MAG Welding |
| Supply | Wholesale / OEM / ODM |
Technical verification notice: The current INWELT page contains conflicting maximum-current values. The CO₂ and mixed-gas ratings above reflect its existing specification panel and must be confirmed against the applicable technical test record before the page is finalized.
For replacement orders, buyers should confirm the welding gun connection, wire feeder model, cable length and front-end consumable configuration.
The PSF405 uses a gas-cooled, also commonly described as air-cooled, MIG welding torch configuration.
This design does not require a separate water-cooling unit or liquid-cooling circuit.
A gas-cooled welding gun can be suitable for industrial welding applications where a self-contained handheld torch assembly is preferred and the operating conditions remain within the applicable current and duty-cycle limits.
Actual torch suitability depends on the welding current, shielding gas, operating duration, cable condition and welding procedure.
The PSF405 is specified for Ø0.8–1.6 mm welding wire.
The correct contact tip and wire liner must be selected according to the electrode diameter and wire material.
For example, a Ø1.2 mm welding wire configuration requires an appropriately sized contact tip and liner.
The standard PSF405 parts list includes an M8 × 37 contact tip for Ø1.2 mm wire. Alternative wire sizes require corresponding consumable specifications.
INWELT offers three standard PSF405 cable lengths:
3 m
4 m
5 m
Cable length should be selected according to workstation layout, distance from the wire feeder and required working reach.
A shorter cable can simplify routing in compact welding areas, while a longer cable provides additional reach around large fabricated assemblies.
For reliable wire feeding, avoid unnecessary sharp bends and excessive cable twisting.
The PSF405 uses a serviceable torch construction with replaceable front-end components.
The standard parts system includes:
Gas nozzle
Contact tip
Gas diffuser
Torch neck
Trigger components
Handle components
Wire liner
Cable assembly
Connection components
Replacement parts should be selected according to the specified torch model, component dimensions and part references.
Welding gun current ratings must be interpreted together with the shielding gas, duty cycle and applicable testing conditions.
The INWELT PSF405 product specification panel currently lists a 60% duty cycle, with different welding-current ratings for CO₂ and mixed shielding gas.
However, the current product page also contains different maximum-current claims. Buyers should refer to the confirmed INWELT technical specification when selecting a torch for a defined welding load.
A 60% duty cycle means that, under the applicable rated conditions, the welding gun can operate for six minutes during a standard ten-minute duty-cycle period.
The remaining time allows the torch to cool sufficiently under those conditions.
Duty cycle should not be interpreted independently of the rated welding current and shielding gas.
Pure CO₂ and mixed shielding gases can produce different thermal conditions during MIG/MAG welding.
Before selecting a PSF405 torch, confirm:
Required welding current
Shielding gas type
Rated duty cycle
Welding wire diameter
Expected arc-on time
Cable assembly condition
Working environment
If the application requires welding beyond the confirmed PSF405 capacity, a higher-capacity torch or an appropriate water-cooled system should be considered.
INWELT lists separate ordering codes for the PSF405 complete welding gun assemblies.
| Complete Torch Code | Description | Cable Length | Connection |
|---|---|---|---|
| ICT1663 | PSF405 MIG Welding Torch | 3 m | Euro Type |
| ICT1664 | PSF405 MIG Welding Torch | 4 m | Euro Type |
| ICT1665 | PSF405 MIG Welding Torch | 5 m | Euro Type |
These codes correspond to the complete torch assemblies currently shown in the INWELT product listing.
The final connector arrangement, spring-pin configuration and cable assembly should be confirmed before placing an order.
The 3 m configuration can be considered for compact welding stations where the wire feeder is positioned relatively close to the work area.
The 4 m configuration provides additional working reach for general fabrication and industrial workshop applications.
The 5 m configuration is intended for workstations requiring greater distance between the welding operator and wire feeder.
Longer cable assemblies should be installed with appropriate routing to reduce unnecessary wire-feeding resistance.
The PSF405 uses replaceable consumables and torch components that should be matched to the specified front-end assembly.
The current INWELT product list identifies the following components.
| Position | Component | Listed Specification |
|---|---|---|
| 1 | Gas Nozzle | Reference 458-464-883 |
| 2 | Contact Tip | Ø1.2 mm / M8 × 37 |
| 3 | Gas Diffuser | M8 / PSF305 / 315 / 400 / 405 type |
| 4 | Torch Head | PSF400 / PSF405 type |
| 5 | Trigger Button | PSF305 / PSF405 type |
| 6 | Switch Base | ESAB-style configuration |
| 7 | Torch Handle | Black / PSF305 / PSF405 type |
| 8 | Joint with Spring | Cable joint component |
| 9 | Coaxial Cable | 3 m standard listed component |
| 10 | Cable Support Spring | Black |
| 11 | Rear Connector Housing Component | According to assembly |
| 12 | Gun Plug Nut | According to connector |
| 13 | Central Adapter Body | Euro-type gas connection |
| 14 | Insulated Steel Liner | Listed as Ø1.4 mm × 3.5 m |
| 15 | MIG Spanner | Maintenance accessory |
The component descriptions reflect the current PSF405 product parts list. For replacement or OEM orders, confirm exact dimensions and component references.
A shared model designation or reference does not guarantee that every component from a different manufacturer or torch generation is interchangeable.
The gas nozzle directs shielding gas toward the welding area and surrounds the welding arc.
The standard INWELT PSF405 parts list identifies a gas nozzle using reference 458-464-883.
When selecting a replacement nozzle, check:
Torch model
Nozzle attachment design
Nozzle opening diameter
Nozzle length
Front-end configuration
Original component reference
A worn, damaged or obstructed nozzle should be inspected and replaced when necessary.
The contact tip transfers welding current to the continuously fed welding wire.
The standard contact tip listed for the INWELT PSF405 is:
Contact Tip Size: Ø1.2 mm
Thread and Length: M8 × 37
Torch Type: PSF405
For Ø0.8, Ø1.0, Ø1.4 or Ø1.6 mm wire, use a compatible contact tip matched to the required wire diameter.
Contact-tip selection should account for the thread, length, wire diameter and relevant torch front-end configuration.
An incorrect contact tip may contribute to inconsistent electrical contact, wire-feeding problems or burnback.
The gas diffuser distributes shielding gas through the front-end assembly.
The PSF405 parts list identifies an M8 gas diffuser within the PSF-type consumable family.
The torch neck, also called the swan neck, supports the contact tip, gas diffuser and nozzle assembly.
For replacement orders, confirm the neck geometry, attachment dimensions and corresponding front-end components.
A visually similar torch neck should not be assumed to fit without checking its mechanical and electrical configuration.
The wire liner guides the welding wire through the cable assembly toward the contact tip.
The standard parts list identifies an insulated steel liner described as Ø1.4 mm and 3.5 m long. This description should be checked against the manufacturer's drawing to confirm the measurement and intended wire range.
Liner selection depends on:
Welding wire diameter
Welding wire material
Cable length
Liner construction
Torch connection system
For 4 m and 5 m complete-torch assemblies, the corresponding liner length must be confirmed.
An incorrectly sized, contaminated or damaged liner can increase wire-feed resistance and contribute to inconsistent feeding.
The INWELT PSF405 is an ESAB-style MIG welding gun intended for equipment using a corresponding torch and connection configuration.
However, ESAB-style does not mean that the torch is automatically interchangeable with every ESAB welding machine or every MIG system from other manufacturers.
The connection system must be checked before installing a replacement welding gun.
The complete PSF405 torch configurations currently listed by INWELT use Euro-type connectors.
Before ordering a replacement gun, verify:
Welding machine manufacturer and model
Wire feeder manufacturer and model
Existing torch connection type
Central power-connection dimensions
Shielding-gas connection
Trigger-contact arrangement
Cable assembly length
Welding wire diameter
Front-end consumable configuration
Even when two welding guns use Euro-style connectors, the actual interface and equipment requirements should be confirmed.
For replacement projects, buyers should provide:
Existing welding gun model
Original torch connector photograph
Wire feeder model
Torch head photograph
Contact-tip and gas-nozzle references
Required cable length
Welding wire diameter
Required quantity
INWELT can review the requested configuration based on the supplied technical information.

| Position | Description |
| 1 | Gas nozzle/ESAB (458-464-883) |
| 2 | Contact tip/Φ1.2mm/M8×37/ESAB |
| 3 | Gas diffuser M8/PSF305/315/400/405/ESAB |
| 4 | Torch head PSF400/405/ESAB |
| 5 | Switch button/PSF305/405/ESAB |
| 6 | Switch base/ESAB |
| 7 | Torch handle/black/PSF305/405/ESAB |
| 8 | Joint with spring |
| 9 | Coaxial cable 3M/ESAB |
| 10 | Spring/cable support/black |
| 11 | Back box hole |
| 12 | Gun plug nut |
| 13 | Euro central adapter body/gas/ESAB |
| 14 | Insulated steel liner Φ1.4mm 3.5M black/ESAB |
| 15 | Spanner for MIG |
| Complete Torch | |
| ICT1663 | Mig torch ESAB PSF405/ 3m /with spring pin/euro type |
| ICT1664 | Mig torch ESAB PSF405/ 4m /with spring pin/euro type |
| ICT1665 | Mig torch ESAB PSF405/ 5m /with spring pin/euro type |
Selecting the correct PSF405 welding gun requires verifying the complete welding application.
Determine the welding current and shielding gas required by the welding procedure.
Compare these values with the confirmed PSF405 current and duty-cycle specifications.
The PSF405 supports Ø0.8–1.6 mm welding wire.
Choose the correct contact tip and wire liner for the required wire diameter and material.
Choose between 3 m, 4 m and 5 m according to the workstation layout and required working reach.
Check the welding machine and wire feeder connections before purchasing.
Do not assume compatibility based only on the appearance of the connector.
Identify the required nozzles, contact tips, gas diffusers, torch neck components and liners.
For distributor purchases, consumable availability should be considered alongside the complete torch order.
The INWELT PSF305 and PSF405 belong to the gas-cooled PSF-style MIG welding torch range.
They are intended for different welding-current requirements and front-end configurations.
| Feature | PSF305 | PSF405 |
|---|---|---|
| Product Type | ESAB-Style MIG Torch | ESAB-Style MIG Torch |
| Cooling | Gas Cooled | Gas Cooled |
| Listed Duty Cycle | 60% | 60% |
| CO₂ Rating | 290A as currently listed | 350A as currently listed; verification pending |
| Mixed-Gas Rating | 260A as currently listed | 320A as currently listed; verification pending |
| Wire Diameter | Ø0.8–1.2 mm | Ø0.8–1.6 mm |
| Cable Length | 3 / 4 / 5 m | 3 / 4 / 5 m |
| Application | Lower-current MIG/MAG applications | Higher-current MIG/MAG applications |
Consider the PSF305 when the required welding current and wire diameter fall within its confirmed technical specifications.
The PSF305 supports a smaller maximum listed wire diameter than the PSF405.
Consider the PSF405 when the application requires a higher-capacity gas-cooled torch configuration and supports wire sizes up to Ø1.6 mm.
Before selecting either model, confirm the required current, shielding gas, duty cycle, connection type and front-end consumables.
The PSF405 is intended for manual MIG/MAG welding operations where its technical specifications are suitable for the application.
The PSF405 can be considered for welding structural steel components, fabricated frames and brackets within the torch's rated operating limits.
Industrial machinery manufacturing frequently involves welded steel components and fabricated assemblies.
The PSF405 provides a gas-cooled torch option where the welding procedure and current requirements are compatible.
Fabrication workshops can evaluate the PSF405 for production and repair work involving compatible materials and welding wire diameters.
The PSF405 can be considered for fabrication of trailer components, brackets and other metal assemblies where the welding procedure matches the torch's operating capabilities.
For maintenance applications, the PSF405 may serve as a replacement welding gun when the original connection system, welding parameters and consumables are compatible.
Regular inspection and correct consumable selection can help prevent avoidable welding interruptions.
| Problem | Possible Cause | Recommended Check |
|---|---|---|
| Torch overheating | Excessive current, duty cycle or loose electrical connection | Check rated conditions and cable connections |
| Wire feeding problems | Incorrect liner, worn contact tip or sharp cable bends | Inspect liner, tip and cable routing |
| Contact tip burnback | Improper tip size, wire feeding or welding parameters | Check contact tip and process settings |
| Excessive welding spatter | Incorrect welding parameters or shielding conditions | Inspect settings, gas delivery and consumables |
| Poor shielding-gas coverage | Blocked nozzle or gas leakage | Inspect nozzle, diffuser and gas connections |
| Unstable arc | Poor electrical contact or irregular feeding | Inspect tip, wire-feed system and connections |
| Trigger not responding | Switch or control-connection fault | Inspect trigger and connector |
| Cable overheating | Damage, poor connection or excessive electrical resistance | Inspect cable and replace damaged components |
A PSF405 welding gun may overheat when the current or operating duty cycle exceeds its rated capacity.
Damaged cable components, loose electrical connections and worn consumables may contribute to excessive heating.
Stop welding if abnormal heating occurs. Allow the gun to cool and inspect the electrical and mechanical components before further use.
Common causes include:
Incorrect liner diameter
Contaminated or damaged liner
Worn contact tip
Excessive cable bends
Incorrect feeder tension
Welding wire deformation
Check the complete wire-feeding path rather than replacing only the contact tip.
An unstable arc can be caused by inconsistent wire feeding, poor current transfer, incorrect gas flow or unsuitable welding settings.
Inspect the contact tip, liner, shielding-gas system and electrical connections.
Regular maintenance helps keep the torch in suitable operating condition.
Remove excessive welding spatter and inspect the nozzle for blockage or deformation.
Check the contact-tip bore for wear, enlargement or damage.
Replace the tip when its condition affects wire feeding or welding-current transfer.
Inspect the diffuser for damage, contamination or improper installation.
Check for contamination, excessive wire-feed resistance or physical damage.
Use the correct liner for the welding wire and cable assembly.
Check the swan neck and its mechanical connections for damage or looseness.
Examine the cable jacket, power connection and control contacts for signs of damage or overheating.
Verify that the trigger functions correctly and the handle components are undamaged.
Disconnect the welding equipment and allow the torch to cool before inspection or component replacement.
INWELT supplies PSF405 welding guns and related components for international business-to-business purchasing requirements.
Typical customers include:
Welding equipment distributors
Welding torch importers
Industrial equipment wholesalers
Welding machine manufacturers
OEM and private-label brands
Metal fabrication companies
Industrial maintenance suppliers
INWELT offers standard PSF405 complete welding gun configurations with 3 m, 4 m and 5 m cable assemblies.
For distributor purchasing, buyers should confirm:
Complete torch model
Cable length
Connector type
Welding wire size
Required consumables
Order quantity
Packaging specification
Destination market
INWELT supports OEM/ODM inquiries for PSF405-type welding torch projects.
Depending on the technical requirements, customization requests may include:
Cable assembly configuration
Connector specification
Product marking
Private-label packaging
Replacement-part configuration
Carton and inner-pack specifications
Sample evaluation before bulk production
For customized projects, customers should provide a technical drawing, product sample or detailed specification.
Distributors purchasing complete PSF405 welding guns may also require matching consumables for inventory and after-sales support.
Common replacement items include:
Gas nozzles
Contact tips
Gas diffusers
Torch necks
Handles
Trigger switches
Wire liners
Cable assemblies
Using verified component references and model-based purchasing records helps reduce replacement-part ordering errors.
The INWELT PSF405 is an ESAB-style gas-cooled MIG/MAG welding gun designed for industrial manual welding. It supports Ø0.8–1.6 mm welding wire and is available with 3 m, 4 m and 5 m cable assemblies.
The INWELT PSF405 is a gas-cooled, or air-cooled, MIG welding torch. It does not require a separate water-cooling circuit.
The current INWELT specification panel lists 350A with CO₂ and 320A with mixed shielding gas at a 60% duty cycle. However, other current values also appear on the existing page. The final current ratings must be confirmed against the INWELT technical data sheet.
The INWELT PSF405 supports Ø0.8–1.6 mm welding wire. The appropriate contact tip and liner must be selected for each wire diameter.
INWELT lists standard 3 m, 4 m and 5 m complete PSF405 welding gun assemblies.
The listed complete torch codes are ICT1663 for 3 m, ICT1664 for 4 m and ICT1665 for 5 m. Each is listed with a Euro-type connection configuration.
The standard INWELT parts list includes an M8 × 37 contact tip for Ø1.2 mm welding wire. Other wire diameters require matching tip sizes.
The current INWELT PSF405 parts list identifies gas nozzle reference 458-464-883. The exact nozzle version and dimensions should be checked before purchasing replacement parts.
The PSF405 is an ESAB-style welding torch, but compatibility depends on the specific welding machine, wire feeder, connector, trigger wiring and consumables. Model-based verification is required.
The standard complete PSF405 configurations currently listed by INWELT use a Euro-type connection. The exact configuration should be confirmed when ordering.
Some parts are listed within the same PSF-type component family. However, parts should only be interchanged when their dimensions, references and technical compatibility have been confirmed.
Both are gas-cooled MIG welding gun models. The PSF405 has a larger listed maximum welding wire diameter and is positioned for higher-current applications. Buyers should compare the confirmed electrical ratings and connection requirements.
Yes. The INWELT product listing includes PSF405 nozzles, contact tips, gas diffusers, torch heads, trigger components, liners and cable parts.
INWELT supports OEM/ODM inquiries involving cable configurations, connector requirements, product marking, packaging and bulk purchasing.
Yes. INWELT supplies PSF405 welding guns and related replacement components for wholesale, distributor and industrial purchasing requirements.
Looking for a PSF405 ESAB-style MIG welding torch manufacturer or wholesale supplier?
INWELT supplies gas-cooled PSF405 welding guns, replacement consumables and OEM/ODM solutions for distributors, importers and industrial buyers.
For an accurate quotation, please provide:
Product model: PSF405
Required cable length: 3 m / 4 m / 5 m
Welding machine and wire feeder model
Required connector configuration
Welding wire diameter
Required operating current and shielding gas
Consumable or spare-part requirements
Order quantity
OEM/ODM requirements
Destination market
Contact INWELT to request PSF405 MIG Welding Torch Specifications, Bulk Pricing, Replacement Parts and OEM/ODM Information.