PMX45
INWELT
60%
6M
Air/N2
Length: | |
---|---|
Connector: | |
Availability: | |
Quantity: | |
It is the popular PMX45 Plasma Cutting Torch. Without HF Ignition, easy to start arc. It is compatible with standard of 45A-65A Plasma Cutting Machine. (i.e. CUT60, CUT40.) The Brand of machines would be Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity and so on.
Technical Data:
Current | 45/65Amp | Gas Flow | 160LPM |
Duty Cycle | 60% | Ignition | Without HF |
Gas | Air/N2 | Post flow | 60 seconds recommended |
Gas Pressure | 5.0 Bar | Standard Length | 6M |
Position | Code | Ref. | Description |
(带 为标准配置 / With is the standard configuration } | |||
1 | ISM0674 | Shield cap PMX45/Hand/45A;保护帽 PMX45/手动枪/45A | |
• 2 | ISM0629 | Shield cap/Hand/PMX45/Pro;保护帽/手动枪/PMX45/Pro | |
3 | 220674 | Shield cap;保护帽 | |
4 | 220675 | Shield cap/Gouging ;保护帽/ | |
• 5 | IVS0692 | Outside nozzle PMX45;外喷嘴/PMX45/带短路环 | |
6 | Tip;喷嘴 | ||
6.1 | IVU0657-09 | Tip O0.9mm/PMX45/45A;PM嘴 O0.9mm/PMX45/45A | |
6.2 | IVU0657-11 | Tip ④ 1.1mm/PMX45P/65A;喷嘴 O1.1mm/PMX45P/65A | |
7 | Tip;喷嘴 | ||
• 7.1 | IVU0659-09 | Tip O0.9mm/PMX45/45A/PRO;喷嘴 <J>O.9mm/PMX45/45A/PRO | |
7.2 | IVU0659-11 | Tip 01.1 mm/PMX45P/65A/PRO;喷嘴 01.1 mm/PMX45P/65A/PRO | |
8 | 220671 | Tip;喷嘴 | |
9 | 220672 | Tip/Gouging;喷嘴/气刨 | |
• 10 | IVF3000 | Swirl ring PMX45/45A;涡流环 PMX45/45A | |
• 11 | IVB3045 | Electrode PMX45/45A;电极/铜件/PMX45/45A | |
12 | IVZ0693-01 | Plasma torch head/PMX45/HexagonCH20*5;等离子枪头ZPMX45/六角CH20*5 | |
12a | IFT8508 | 0 RING O16*1.8/NBR/BLACK;0型圈 016*1.8 丁腊橡胶/黑色 | |
13 | IGV0038-01 | Plasma handle manuale/PT20-60/PX torch head;等离子手工手柄/PT20-60/适用于PX枪头 | |
14 | IHJ0722 | Protection part/plasma/yellow;开关保护档片/等离子用/黄色 | |
15 | IHQ0070 | Trigger red;焊枪用开关21.8MM红色 | |
16 | IHJ0898 | Plasma JoinVPT20-60;等离子用球节套件/PT20-60 | |
17 | Cable assembly;电缆组 | ||
17.1 | IVN01804061-22 | Cable assem bly/PMX45/6M/2 wi res/i nteg rated:电缆组/PMX45/6M/4 平方 /2 芯/气电一体 | |
17.2 | IVN01804063-22 | Cable assem bly/PMX45/6M/2 wires/separate;m 缆组/PMX45/6M/4 平方 /2 芯/气电分体 | |
17.3 | IVN01804060-22 | Cable assem bly/PMX45/6M/2 wires/centre adaptor;电缆组/PMX45/6M/4 平方/2 芯/中央插头 | |
17.4 | IVN01804066-22 | Cable assem bly/PMX45/6M/4 wires/centre adaptor;电缆组/PMX45/6M/4 平方/4 芯/中央插头 | |
17.5 | IVN01806061-22 | Cable assem bly/PMX45/6M/2 wi res/i nteg rated:电缆组/PMX45/6M/6 平方 /2 芯/气电一体 | |
17.6 | IVN01806063-22 | Cable assem bly/PMX45/6M/2 wires/separate; m 缆组/PMX45/6M/6 平方 /2 芯/气电分体 | |
17.7 | IVN01806060-22 | Cable assem bly/PMX45/6M/2 wires/centre adaptor;电缆组/PMX45/6M/6 平方/2 芯/中央插头 | |
17.8 | IVN01806066-22 | Cable assem bly/PMX45/6M/4 wires/centre adaptor;电缆组/PMX45/6M/6 平方/4 芯/中央插头 | |
17.9 | IVN0180606C-300 | Cable assem bly/PMX45/6M/Coaxial cable/centre adaptor;电缆组 PMX45/6M/6 平方/同轴电缆冲央插头 | |
18 | IZX0078 | Centre adaptor torchside PLASMA 5 PINS;等离子中央插头/5针 |
INWELT PLASMA TORCH CATALOG.pdf
Introduction:
The PMX45 Plasma Cutting Torch is the ultimate tool for precision cutting. Our plasma torch for sale is equipped with advanced plasma cutting torches and delivers clean and smooth cuts every time. It's designed for heavy-duty use, making it suitable for various applications. Whether you're a professional welder or a DIY enthusiast, our plasma cutting torch is the right tool for you. Check out our plasma torches for sale and upgrade your welding equipment today. From plasma welding torches to argon cutting torches, we offer a wide range of torch products to meet your needs. Experience the difference with our plasma torch cutting and plasma cutting gases. Choose the PMX45 Plasma Cutting Torch over a regular cut torch or plasma cutter for superior performance.
A: Yes, we can support sample. The sample will be charged reasonably according to the negotiation between us.
A: Yes, we have a R&D capability and professional & efficient team, OEM and ODM are available from us.
A: Special discount Marketing protection.
A: Yes, we have engineers ready to assist customers with technical support problems, any issues that may arise during the quoting or installation process, as well as aftermarket support.
A: Yes. We ship our products in bulk, usually 40 Feet High Cube Containers, but 20 feet containers are also acceptable.
A: Sure, welcome your visit to our factory.
It is the popular PMX45 Plasma Cutting Torch. Without HF Ignition, easy to start arc. It is compatible with standard of 45A-65A Plasma Cutting Machine. (i.e. CUT60, CUT40.) The Brand of machines would be Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity and so on.
Technical Data:
Current | 45/65Amp | Gas Flow | 160LPM |
Duty Cycle | 60% | Ignition | Without HF |
Gas | Air/N2 | Post flow | 60 seconds recommended |
Gas Pressure | 5.0 Bar | Standard Length | 6M |
Position | Code | Ref. | Description |
(带 为标准配置 / With is the standard configuration } | |||
1 | ISM0674 | Shield cap PMX45/Hand/45A;保护帽 PMX45/手动枪/45A | |
• 2 | ISM0629 | Shield cap/Hand/PMX45/Pro;保护帽/手动枪/PMX45/Pro | |
3 | 220674 | Shield cap;保护帽 | |
4 | 220675 | Shield cap/Gouging ;保护帽/ | |
• 5 | IVS0692 | Outside nozzle PMX45;外喷嘴/PMX45/带短路环 | |
6 | Tip;喷嘴 | ||
6.1 | IVU0657-09 | Tip O0.9mm/PMX45/45A;PM嘴 O0.9mm/PMX45/45A | |
6.2 | IVU0657-11 | Tip ④ 1.1mm/PMX45P/65A;喷嘴 O1.1mm/PMX45P/65A | |
7 | Tip;喷嘴 | ||
• 7.1 | IVU0659-09 | Tip O0.9mm/PMX45/45A/PRO;喷嘴 <J>O.9mm/PMX45/45A/PRO | |
7.2 | IVU0659-11 | Tip 01.1 mm/PMX45P/65A/PRO;喷嘴 01.1 mm/PMX45P/65A/PRO | |
8 | 220671 | Tip;喷嘴 | |
9 | 220672 | Tip/Gouging;喷嘴/气刨 | |
• 10 | IVF3000 | Swirl ring PMX45/45A;涡流环 PMX45/45A | |
• 11 | IVB3045 | Electrode PMX45/45A;电极/铜件/PMX45/45A | |
12 | IVZ0693-01 | Plasma torch head/PMX45/HexagonCH20*5;等离子枪头ZPMX45/六角CH20*5 | |
12a | IFT8508 | 0 RING O16*1.8/NBR/BLACK;0型圈 016*1.8 丁腊橡胶/黑色 | |
13 | IGV0038-01 | Plasma handle manuale/PT20-60/PX torch head;等离子手工手柄/PT20-60/适用于PX枪头 | |
14 | IHJ0722 | Protection part/plasma/yellow;开关保护档片/等离子用/黄色 | |
15 | IHQ0070 | Trigger red;焊枪用开关21.8MM红色 | |
16 | IHJ0898 | Plasma JoinVPT20-60;等离子用球节套件/PT20-60 | |
17 | Cable assembly;电缆组 | ||
17.1 | IVN01804061-22 | Cable assem bly/PMX45/6M/2 wi res/i nteg rated:电缆组/PMX45/6M/4 平方 /2 芯/气电一体 | |
17.2 | IVN01804063-22 | Cable assem bly/PMX45/6M/2 wires/separate;m 缆组/PMX45/6M/4 平方 /2 芯/气电分体 | |
17.3 | IVN01804060-22 | Cable assem bly/PMX45/6M/2 wires/centre adaptor;电缆组/PMX45/6M/4 平方/2 芯/中央插头 | |
17.4 | IVN01804066-22 | Cable assem bly/PMX45/6M/4 wires/centre adaptor;电缆组/PMX45/6M/4 平方/4 芯/中央插头 | |
17.5 | IVN01806061-22 | Cable assem bly/PMX45/6M/2 wi res/i nteg rated:电缆组/PMX45/6M/6 平方 /2 芯/气电一体 | |
17.6 | IVN01806063-22 | Cable assem bly/PMX45/6M/2 wires/separate; m 缆组/PMX45/6M/6 平方 /2 芯/气电分体 | |
17.7 | IVN01806060-22 | Cable assem bly/PMX45/6M/2 wires/centre adaptor;电缆组/PMX45/6M/6 平方/2 芯/中央插头 | |
17.8 | IVN01806066-22 | Cable assem bly/PMX45/6M/4 wires/centre adaptor;电缆组/PMX45/6M/6 平方/4 芯/中央插头 | |
17.9 | IVN0180606C-300 | Cable assem bly/PMX45/6M/Coaxial cable/centre adaptor;电缆组 PMX45/6M/6 平方/同轴电缆冲央插头 | |
18 | IZX0078 | Centre adaptor torchside PLASMA 5 PINS;等离子中央插头/5针 |
INWELT PLASMA TORCH CATALOG.pdf
Introduction:
The PMX45 Plasma Cutting Torch is the ultimate tool for precision cutting. Our plasma torch for sale is equipped with advanced plasma cutting torches and delivers clean and smooth cuts every time. It's designed for heavy-duty use, making it suitable for various applications. Whether you're a professional welder or a DIY enthusiast, our plasma cutting torch is the right tool for you. Check out our plasma torches for sale and upgrade your welding equipment today. From plasma welding torches to argon cutting torches, we offer a wide range of torch products to meet your needs. Experience the difference with our plasma torch cutting and plasma cutting gases. Choose the PMX45 Plasma Cutting Torch over a regular cut torch or plasma cutter for superior performance.
A: Yes, we can support sample. The sample will be charged reasonably according to the negotiation between us.
A: Yes, we have a R&D capability and professional & efficient team, OEM and ODM are available from us.
A: Special discount Marketing protection.
A: Yes, we have engineers ready to assist customers with technical support problems, any issues that may arise during the quoting or installation process, as well as aftermarket support.
A: Yes. We ship our products in bulk, usually 40 Feet High Cube Containers, but 20 feet containers are also acceptable.
A: Sure, welcome your visit to our factory.